HP Deploying HP Enterprise Networks Sample Questions:

1. Click the Exhibit button.

Given the following configuration and topology:

What happens when Switch 4 completes its boot cycle and joins the MSTP domain?

A) MSTP detects an inconsistency between region configurations by analyzing the digest in the BPDU, then uses Commons Spanning tree between Switch 1 and Switch 4, and Switch 2 and Switch 4.
B) MSTP does not modify the region configuration, and only traffic for instances 1 and 2 are carried over trunk links.
C) MSTP updates the region configuration of the switches with lower revision numbers and creates additional VLANs.
D) MSTP detects an inconsistency between region configurations by analyzing the digest in the BPDU, then uses Commons Spanning tree between Switch 1 and Switch 4, and Switch 2 and Switch 4.
E) MSTP detects an inconsistency between region configurations by analyzing the digest in the BPDU, then uses Commons Spanning tree between Switch 1 and Switch 4, and Switch 2 and Switch 4.
F) MSTP updates the region configuration of switches with older revisions and the additional VLANs are not created.

2. Click the Exhibit button.

You have been asked to recommend a design and configuration for an HP OSPF multi-area network. In order to conserve memory and CPU cycles, you have been asked to configure Area 1 so that the routing table and LSDB on R3 are kept as small as possible, while still supporting OSPF. There is a requirement that R3 be able to import routes into OSPF from a RIP router outside the OSPF network. The RIP router will not be sending a default route into the OSPF network. Based on these requirements, what is the best configuration in Area 1 on both R1 and R3?

A) [R1] ospf 1 area 1 network 10.1.1.1 0.0.0.0 nssa no-summary [R3] ospf 1 area 1 network 10.1.1.2 0.0.0.0 nssa no-summary
B) [R1] ospf 1 area 1 network 10.1.1.1 0.0.0.0 nssa no-summary [R3] ospf 1 area 1 network 10.1.1.2 0.0.0.0 nssa
C) [R1] ospf 1 area 1 network 10.1.1.1 0.0.0.0 stub no-summary [R3] ospf 1 area 1 network 10.1.1.2 0.0.0.0 stub
D) [R1] ospf 1 area 1 network 10.1.1.1 0.0.0.0 nssa default-route-advertise no-summary [R3] ospf 1 area 1 network 10.1.1.2 0.0.0.0 nssa

3. Click the Exhibit button and view both exhibits. AS 20 advertises prefix 20.0.0.0 /8, and AS 30 advertises prefix 30.0.0.0 /8. On Router-2,


what is the BGP Next Hop attribute for prefix 30.0.0.0 /8?

A) 20.1.1.1
B) 30.1.1.1
C) 16.3.3.3
D) 16.0.0.3
E) 16.0.0.1
F) 16.2.2.2

4. In an attempt to control unauthorized Internet access during non-business hours, you implement time-based ACLs on the edge router of your branch offices, prohibiting access in the evenings and weekends. Which time range is most appropriate for implementing this rule set?

A) absolute
B) multi-instance
C) periodic
D) recurring

5. Which OSPF LSA types represent external routes redistributed by ASBRs into OSPF, routes advertised by DRs, and LSAs generated by Graceful Restart routers? (Select three.)

A) Type 4
B) Type 9
C) Type 2
D) Type 5
E) Type 3
F) Type 1

Solutions: