[Dec 14, 2023] Dumps Collection NSE5_FAZ-7.0 Test Engine Dumps Training With 116 Questions
Fortinet NSE5_FAZ-7.0 Dumps - 100% Cover Real Exam Questions
Fortinet NSE5_FAZ-7.0 (Fortinet NSE 5 - FortiAnalyzer 7.0) Certification Exam is a certification program designed for IT professionals who want to prove their skills and expertise in using FortiAnalyzer to collect, analyze, and report on log data generated from Fortinet devices. Fortinet NSE 5 - FortiAnalyzer 7.0 certification is aimed at professionals who have experience in network security and have a good understanding of Fortinet products and solutions. Fortinet NSE 5 - FortiAnalyzer 7.0 certification exam covers topics such as FortiAnalyzer administration, log management, event management, and reporting.
NEW QUESTION # 61
FortiAnalyzer centralizes which functions? (Choose three)
- A. Vulnerability assessment
- B. Content archiving / data mining
- C. Network analysis
- D. Security log analysis / forensics
- E. Graphical reporting
Answer: B,D,E
NEW QUESTION # 62
Which statement is true about sending notifications with incident updates?
- A. Notifications can be sent only by email.
- B. Notifications can be sent only when an incident is updated or deleted.
- C. If you use multiple fabric connectors, all connectors must have the same notification settings
- D. You can send notifications to multiple external platforms
Answer: B
NEW QUESTION # 63
Which daemon is responsible for enforcing the log file size?
- A. sqlplugind
- B. ofrpd
- C. logfiled
- D. miglogd
Answer: C
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 121: The logfiled process enforces the log file size and is also responsible for disk quota enforcement by monitoring the other processes.
NEW QUESTION # 64
Refer to the exhibit.
Which statement is correct regarding the event displayed?
- A. The security risk was blocked or dropped.
- B. The security event risk is considered open.
- C. An incident was created from this event.
- D. The risk source is isolated.
Answer: A
NEW QUESTION # 65
An administrator fortinet, is able to view logs and perform device management tasks, such as adding and removing registered devices. However, administrator fortinet is not able to create a mall server that can be used to send email.
What could be the problem?
- A. Fortinet is assigned the Restricted_ User administrator profile.
- B. ADOM mode is configured with Advanced mode.
- C. A trusted host is configured.
- D. Fortinet is assigned the Standard_ User administrator profile.
Answer: D
NEW QUESTION # 66
Which two methods are the most common methods to control and restrict administrative access on FortiAnalyzer? (Choose two.)
- A. Administrative access profiles
- B. Virtual domains
- C. Security Fabric
- D. Trusted hosts
Answer: A,D
Explanation:
Reference:
https://docs2.fortinet.com/document/fortianalyzer/6.0.0/administration-guide/581222/trusted-hosts
NEW QUESTION # 67
If you upgrade the FortiAnalyzer firmware, which report element can be affected?
- A. Report scheduling
- B. Output profiles
- C. Report settings
- D. Custom datasets
Answer: D
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/upgrade-guide/669300/checking-reports
NEW QUESTION # 68
Which log type does the FortiAnalyzer indicators of compromise feature use to identify infected hosts?
- A. Application control logs
- B. Web filter logs
- C. IPS logs
- D. Antivirus logs
Answer: B
Explanation:
Reference:
FortiAnalyzer_Admin_Guide/3600_FortiView/0200_Using_FortiView/1200_Compromised_hosts_page.htm?
TocPath=FortiView%7CUsing%20FortiView%7C_____6
NEW QUESTION # 69
Which two statements are true regarding log fetching on FortiAnalyzer? (Choose two.)
- A. Log fetching can be done only on two FortiAnalyzer devices that are running the same firmware version.
- B. A FortiAnalyzer device can perform either the fetch server or client role, and it can perform two roles at the same time with the same FortiAnalyzer devices at the other end.
- C. Log fetching allows the administrator to fetch analytics logs from another FortiAnalyzer for redundancy.
- D. Log fetching allows the administrator to run queries and reports against historical data by retrieving archived logs from one FortiAnalyzer device and sending them to another FortiAnalyzer device.
Answer: A,D
Explanation:
Reference:
Using FortiAnalyzer, you can enable log fetching. This allows FortiAnalyzer to fetch the archived logs of specified devices from another FortiAnalyzer, which you can then run queries or reports on for forensic analysis.
The FortiAnalyzer device that fetches logs operates as the fetch client, and the other FortiAnalyzer device that sends logs operates as the fetch server. Log fetching can happen only between two FortiAnalyzer devices, and both of them must be running the same firmware version. A FortiAnalyzer device can perform either the fetch server or client role, and it can perform two roles at the same time with different FortiAnalyzer devices at the other end.
FortiAnalyzer_7.0_Study_Guide-Online pag. 168
NEW QUESTION # 70
You crested a playbook on FortiAnalyzer that uses a FortiOS connector
When configuring the FortiGate side, which type of trigger must be used so that the actions in an automation stitch are available in the FortiOS connector?
- A. FortiAnalyzer Event Handler
- B. Fabric Connector event
- C. Incoming webhook
- D. FortiOS Event Log
Answer: C
Explanation:
"One possible scenario is shown on the slide:
1. Traffic flows through the FortiGate
2. FortiGate sends logs to FortiAnalyzer
3. FortiAnalyzer detects some suspicious traffic and generates an event
4. The event triggers the execution of a playbook in FortiAnalyzer, which sends a webhook call to FortiGate so that it runs an automation stitch
5. FortiGate runs the automation stitch with the corrective or preventive actions" FortiAnalyzer_7.0_Study_Guide-Online page 228 In order to see the actions related to the FOS connector, you must enable an automation rule using the Incoming Webhook Call trigger on the FortiGate side. FortiAnalyzer_7.0_Study Guide page no 233
NEW QUESTION # 71
Which two methods can you use to send event notifications when an event occurs that matches a configured event handler? (Choose two.)
- A. SMS
- B. IM
- C. SNMP
- D. Email
Answer: C,D
Explanation:
Reference:
FortiAnalyzer_Admin_Guide/1800_Events/0200_Event_handlers/0600_Create_event_handlers.htm
NEW QUESTION # 72
What can the CLI command # diagnose test application oftpd 3 help you to determine?
- A. What logs, if any, are reaching FortiAnalyzer
- B. What ADOMs are enabled and configured
- C. What devices are registered and unregistered
- D. What devices and IP addresses are connecting to FortiAnalyzer
Answer: D
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/cli-reference/395556/test#test_application
NEW QUESTION # 73
In FortiAnalyzer's FormView, source and destination IP addresses from FortiGate devices are not resolving to a hostname. How can you resolve the source and destination IPs, without introducing any additional performance impact to FortiAnalyzer?
- A. Configure local DNS servers on FortiAnalyzer
- B. Resolve IPs on a per-ADOM basis to reduce delay on FortiView while IPs resolve
- C. Configure # set resolve-ip enable in the system FortiView settings
- D. Resolve IPs on FortiGate
Answer: D
NEW QUESTION # 74
Which FortiAnalyzer feature allows you to use a proactive approach when managing your network security?
- A. FortiView Monitor
- B. Threat hunting
- C. Outbreak alert services
- D. Incidents dashboards
Answer: B
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 217: Threat hunting consists in proactively searching for suspicious or potentially risky network activity in your environment. The proactive approach will help administrator find any threats that might have eluded detection by the current security solutions or configurations.
NEW QUESTION # 75
How does FortiAnalyzer retrieve specific log data from the database?
- A. SQL FROM statement
- B. SQL EXTRACT statement
- C. SQL GET statement
- D. SQL SELECT statement
Answer: A
Explanation:
https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/137bb60e-ff37-11e8-8524-f8bc1258b856/fortianalyzer-fortigate-sql-technote-40-mr2.pdf
NEW QUESTION # 76
What is the recommended method of expanding disk space on a FortiAnalyzer VM?
- A. From the VM host manager, add an additional virtual disk and use the #execute lvm extend <disk number> command to expand the storage
- B. From the VM host manager, expand the size of the existing virtual disk and use the # execute format disk command to reformat the disk
- C. From the VM host manager, expand the size of the existing virtual disk
- D. From the VM host manager, add an additional virtual disk and rebuild your RAID array
Answer: A
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD40848
NEW QUESTION # 77
FortiAnalyzer uses the Optimized Fabric Transfer Protocok (OFTP) over SSL for what purpose?
- A. To prevent log modification during backup
- B. To encrypt log communication between devices
- C. To send an identical set of logs to a second logging server
- D. To upload logs to an SFTP server
Answer: B
NEW QUESTION # 78
What is the purpose of the following CLI command?
- A. To add a log file checksum
- B. To encrypt log communications
- C. To add a unique tag to each log to prove that it came from this FortiAnalyzer
- D. To add the MD's hash value and authentication code
Answer: A
Explanation:
https://docs2.fortinet.com/document/fortianalyzer/6.0.3/cli-reference/849211/global
NEW QUESTION # 79
Which statements are true of Administrative Domains (ADOMs) in FortiAnalyzer? (Choose two.)
- A. Once enabled, the Device Manager, FortiView, Event Management, and Reports tab display per ADOM.
- B. ADOMs are enabled by default.
- C. All administrators can create ADOMs--not just the admin administrator.
- D. ADOMs constrain other administrator's access privileges to a subset of devices in the device list.
Answer: A,D
NEW QUESTION # 80
......
Fortinet NSE5_FAZ-7.0 exam measures the candidate’s understanding of FortiAnalyzer 7.0 features, including log management, report generation, and threat analysis. NSE5_FAZ-7.0 exam is designed to test a candidate’s ability to configure FortiAnalyzer 7.0 to analyze logs from Fortinet security devices, such as FortiGate, FortiWeb, and FortiMail.
Realistic TopExamCollection NSE5_FAZ-7.0 Dumps PDF - 100% Passing Guarantee: https://examcompass.topexamcollection.com/NSE5_FAZ-7.0-vce-collection.html
